Galvanized Steel Composite Metal Decking Formwork for Floor Slab
1. faster erection.
3. high strength.
4. cost saving.
The thickness of the floor slab is 0.8mm, 1.0mm, 1.2mm, width
688mm~940mm, height 5 1 mm ~76mm. The engineering floor slab and
reinforced concrete structure work together, which is a composite
structure. The laying of the floor slab is connected with the steel
beam, the end of the plate is welded with the steel beam, and the
stud and the steel beam are penetrated and welded in the middle;
the connecting plate is connected with the special clamping tongs
and the pressure hole is connected; Galvanized plug plates are spot
welded with floor slabs and steel beams. If the profiled cutting
plate with curved area is cut by a plasma cutting machine, the slit
is smooth and the surface is completely galvanized.
|Product Name||Galvanized steel floor deck formwork|
|Base material||Hot dipped galvanized high strength steel sheet|
|Effective Width||200-1100mm customized|
|Height||30-140mm per design and calculation needs|
|Quality||SGCC, DX51, ASTM 653, A792, G450, G500, G550 (MPA)|
|Based Zinc-coating||Up to 350g/m2|
Our steel deck has very effective cross stiffener technology and
the deep profile shape provides a very efficient metal deck and
composite slab, with a low usage of concrete. It has following
Efficient - low use of steel and concrete.
Versatile – top or bottom flange application.
Nestable profile gives low transport and handling costs.
To complete our floor decking products we advise a complete floor
slab construction by adding the supply and laying of reinforced
concrete. This single point solution allows a fully integrated
metal deck and concrete slab with associated trade interface and
Composite slab which is comprised of lightly reinforced concrete
cast on profiled steel decking are an option whether the beams are
downstand or integrated within the slab depth for a shallow floor
form of construction. The slabs are normally reinforced using an
upper layer of mesh and, sometimes additional bars in the troughs
(usually for longer periods of fire resistance and heavy loads).
Fiber reinforcement may also be used. Spans of up to 4.5 m can be
achieved using trapezoidal decking. Some so-called deep decking
profiles also exist (over 200 mm deep), that can span 6 m or so
without propping during construction.
a. Dynamic loading test, qualified building slabs are subjected to
several sets of dynamic loading tests, and the shear-bonding
coefficient of the composite slab is obtained. The combined ability
of the building slab and concrete is tested, and it is obtained
that it is subjected to large span. Design load.
b. Fire test, using 1.5 sets of floor slabs to do 1.5 hour, 2 hours
and 3 hours load fire test in the fireproof laboratory, and measure
the temperature distribution inside the floor, test whether the
floor support plate meets the heat insulation requirements, and is
fire resistant. Positive bending moment resistance of the stage.
While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure
and provide fast work procedures. It can save a lot of construction time compared to traditional
floor decking system. It can also improve the rigidity of the floor
and save the amount of steel and concrete, so as to reduce the
The Surface embossed increase the bonding of floor deck and
concrete, make the floor deck system has high-strength bearing
capacity. It is totally fire-proof and can span long without middle
So from cost saving and time saving view, the FASEC rebar-truss
triangle welded metal decking system is better choice. However, in
much of ready design, the deck is already designed and in avoiding
of redesign, recalculation and re-submit/approval, we can also
offer various customized steel floor deck profiles to cater for
various contractors’ need, meanwhile we will offer various
technical support in the aspects of load span and stress analysis
Following are some typical detail:
Warmly welcome various clients from International market to enquiry
and visit us!